Arty CNC Router / Spindle Options



Bosch 1617evs

This 120 VAC 60 Hz 2.25 HP router is relatively quite even at high speeds.  Features include: 2.25 HP 12 AMP motor, variable speed dial (8,000 - 25,000 RPM), soft start, constant response circuitry to maintain constant RPM under load and a dust-sealed power switch.  This router requires the 3.5" diameter mounting brackets.


Power Cable 7518

This 120 VAC 60 Hz 3.25 HP router is a solid work horse but it's loud, especially at higher spindle speeds.  Features include: 3.25 HP 15 AMP motor, electronic 5 speed (10,000, 13,000, 16,000, 19,000 and 21,000 RPM), soft start, dust-sealed switch and sealed ball bearing construction.  This router requires the 4.2" diameter mounting brackets.

Water Cooled Spindle

This 220 VAC 400 Hz 3 HP spindle is whisper quiet and provides excellent performance in a compact package.  Features include: a water cooled high frequency 2200 Watt motor powered by the variable frequency drive, ER20 collet chuck, NSK bearings with run out measuring less than .005mm.  Can be run at low RPM for sanding using a sanding mop.

 

Provide your own router and save a few bucks.  Legacy can provide the mounting brackets for either a 3.5" diameter router motor or a 4.2" diameter motor.

Watch the Spindle Options Video to see and hear the differences between a router and the water cooled spindle.

Watch the video...