« Three Legged Pedestal - Part 1 of 2 | Main | Hollow Spiral Newel Post - Part 8 »
Monday
Dec132010

Wooden Bench Vise

John Hennen of Legacy Woodworking Machinery used VCarve Pro and Conversational CAM to create the code to machine all of the parts for this wooden vise except the threads that are machined in the back plate.  The program for tapping the threads was written in G Code.    Legacy CNC customers can login and follow this link to download the files and codes to build the wooden vise project.

Wooden Vise Files and Programs...

References (9)

References allow you to track sources for this article, as well as articles that were written in response to this article.
  • Response
    Response: Couponactive.com
  • Response
    Response: Jeannetta Konderla
    I found a great...
  • Response
    would have oppressed and irritated Mr. Lennox Zapatillas Nike Free Haven 3.0 . As she realised what might have be Maillot Slovaquie Pas Cher en, she grew to be thankful for what was. They were at the lowest now; they could not be Zapatillas Nike Free Haven 3.0 worse. Edith’s astonishment ...
  • Response
    ow the history of a very portly toad, added to her habitual affectionateness, made her run back to Maggie and say, “Oh, there is such a big, funny toad, Maggie! Do come and see!” Maggie said nothing, but turned away from her with a deeper frown. A
  • Response
    Wooden Bench
  • Response
    Response: cheap air max
    Wooden Bench
  • Response
    Wooden Bench
  • Response
    Wooden Bench
  • Response
    Wooden Bench

Reader Comments (4)

When will the code be on the download site?
Frank p.

December 13, 2010 | Registered CommenterFrank Palange

12-15-2010
04:31AM

John,

I have to say that I was very impressed with the versatility of the Artisan! I own a KOMO MACH I 510 CNC and it is in no way as versatile as your equipment! I am looking forward to visiting your company next year! God Bless all of you at Legacy and may all have a very Merry Christmas and Prosperous New Year!

Regards,

Dante' Louis Grassi
President-Dante', LLC

December 15, 2010 | Unregistered CommenterDante' Louis Grassi

John,
Can you comment on the use of double sided tape?
I see the table doesn't support a vacuum system.
Does the movable touchoff pad tell the machine the height of the material after the application of the tape?

November 21, 2012 | Registered CommenterPatriotWorks

Hi
I'm log in and I can't download the file, can you help out on this.
Thank you

January 14, 2013 | Registered CommenterMarcel LeBlanc

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
All HTML will be escaped. Textile formatting is allowed.